PCS9100

XPR10VT-4P  PR9266/12 PR9268/20/30 PR9268/60/70电动式振动瓦震传感器PR6418相对位移传感器PR9350电感式位移传感器PR9376转速传感器PR9270加速度传感器TM0782A-K/TM078振动速度传感器cd-1/cd-2/cd-4/cd-4a/cd-6/cd-6a/cd-7-c/cd-7-s/cd-8/瓦盖振动传感器cd-21-2-c/cd-21-2-s/cd-21-t/cd-21c/s/bcd-21a/cd721/

wind振动速度传感器mls-9/mlv-6/mlv-7/mlv-8/mlv-9200/mlv-9268/mlv-27/mt1/mt2t/mt3t/mt3m/振动传感器cs-cd-001/cs-cd-SYTD2-A50，SYTD2-A80膨胀传感器tm0782a/tm0783a/ca-yd/yd/kd/tm0782a/winh/mta/pr9270/shq-25x/200150/200155/200157/200350/200355/ca-gt加速度传感器lvdt位移传感器1000td2000td3000td4000td5000td6000tdczj-b2/cz-6/cjz-d/cjz-d2/mli-2001/wb-9902/wb-8112b/zj2/zj2-a/轴瓦振动监视保护仪8500/85100xy/85564/85200/85850bcd-21a/vibr
SYTD2-A50，SYTD2-A80膨胀传感器010/od9200/od9300/s6000/pr9266/pr9268/20/30/60/70/轴瓦振动传感器mlv-9200（16699/900）/9200/74712/47633/ht-2zd-24/zd25/zdf轴瓦振动速度传感器vb-z9500/vb-z9600/sj1061/sj1062磁电式振动速度传感器793V-K/TM079VD瓦震振动传感器PT079VD 3A/TM0j116/zxp-j200/zxp-j210/zxp—j220/dzx-400/pdm1201/wli-2004/wli-2003/wli-2001/s2662/vrs2000a11/wli-2011/pt2010/11双通道轴承振动监测仪zxp-j400/zxp—j510/zxp—j520/xd-2/xzk-1/od-9008s/双通道瓦盖振动测量
SYTD2-A50，SYTD2-A80膨胀传感器有频率约10hz振幅极限2mm（峰-峰值）zui大加速度10g安装方式垂直；水平；垂直、水平两用型温度范围-30℃～120℃相对湿度至95%不冷凝外形尺寸φ35×78mm重量约350g安装螺纹m10×1.5订货指南选型代号trlv-a□□-b□□选型说明灵敏度a□□01——20mv/mm/s；02——30mv/mm/s；03——50mv/mm/s测量方向b□□01——垂直；02——水平；03——垂直、水平两用sz-5/sz-6/sz-6b/trlv/tm0793v/tm079vd/9200/74712/47633磁电式低频磁电式速度位移传感电涡流轴位移传感器轴振动探头OD-051/OD-053/OD-054/OD-055/OD-081/OD-083/OD-061/OD-062/OD-151/OD-162/OD-165电涡流轴位移传感器轴振动探头前置器EC-001/EC-002/EC-003电涡流轴位移传感器轴振动探头延伸缆PR6422/PR6423/PR6424/PR6425/PR6426电涡流轴位移传感器轴振动探头CON011/91、技术参数灵敏度20～50mv/mm/s±1%（根据用户调整）频率响应（可选）5～100hz，10～500hz，10～1000hz固ocontrol110/en900/en2000a1/振动监控仪表zxp-f3200/zxp-
 

W1N8400-A01-B05，WIN8400热膨胀传感器This product is a sensor designed for measuring the expansion of steam turbine units in the steam turbine industry. It has local and remote indications. The local indication has a large field of vision. It uses an intermediate frequency displacement sensor as the sensing element. The remote indication has good linearity, strong anti-interference, good reliability, and can be used continuously. The output is a standard current signal or voltage signal. It has a matching thermal expansion monitoring instrument.

▲ Technical indicators

1. Linear range: 0~25mm; 0~35mm； 0~50mm。 (Special specifications shall be in accordance with the contract)

2. Comprehensive accuracy: Level 1.0

3. Output: the sensor output is 4-20mA/0-10V/0-5V/1-5V.

4. Working temperature of sensor: - 10~100 ℃

5. Working mode: continuous

6. Excitation power supply: 1KHz, 5 ～ 12V rms (external power supply can be provided.



Installation Instructions

The sensor is installed on site, and its power box and indicator can be installed at the operation place or centralized control room. Others shall comply with the general requirements of electromechanical instruments. Note the following:

1. Before installation, the power supply must be connected. Check whether the local indication of the sensor is consistent with the scale of the thermal expansion monitoring protector, so as to check whether there is any deviation from the original factory adjustment value during transportation.

2. The sensor can be installed at any position, but it cannot be close to the strong magnetic field or strong current wire.





PR9266/10 PR9268/11 PR9266/12 PR9268/20/30 PR9268/60/70 Electric vibration pad vibration sensor PR6418 relative displacement sensor PR9350 inductive displacement sensor PR9376 speed sensor PR9270 acceleration sensor TM0782A-K/TM078 vibration speed sensor cd-1/cd-2/cd-4/cd-4a/cd-6/cd-6a/cd-7-c/cd-7-s/cd-8/pad cover vibration sensor cd-21-2-c/cd-21-2-s/cd-21-t/s/bcd-21a/cd721/wind vibration speed sensor mls-9/mlv-6/mlv-7/mlv-8/mlv- 9200/mlv-9268/mlv-27/mt1/mt2t/mt3t/mt3m/vibration sensor cs-cd-001/cs-cd-SYTD2-A50, SYTD2-A80 expansion sensor tm0782a/tm0783a/ca yd/yd/kd/tm0782a/winh/mta/pr9270/shq-25x/200150/200155/200157/200350/200355/ca gt acceleration sensor lvdt displacement sensor 1000td2000td3000td4000td5000td6000tdczj-b2/cz-6/cjz-d/cjz-d2/mli-2001/wb-9902/wb-8112b/zj2/zj2-a/bearing pad vibration monitoring protector 8500/85100xy/85564/85200/85850bcd-21a/vibr

SYTD2-A50， SYTD2-A80 expansion sensor 010/od9200/od9300/s6000/pr9266/pr9268/20/30/60/70/bearing bush vibration sensor mlv-9200 (16699/900) /9200/74712/47633/ht-2zd-24/zd25/zdf bearing bush vibration speed sensor vb-z9500/vb-z9600/sj1061/sj1062 magnetoelectric vibration speed sensor 793V-K/TM079VD bearing vibration sensor PT079VD 3A/TM0j116/zxp-j200/zxp-j210/zxp - j220/dzx-400/pdm1201/wli-2004/wli-2003/wli-2001/s2662/vrs2000a11/wli-2011/pt2010/11 dual channel bearing vibration monitor zxp-j400/zxp-jjj 510/zxp-j520/xd-2/xzk-1/od-9008s/vibration measurement of double channel bushing cover

SYTD2-A50 and SYTD2-A80 expansion sensors have a frequency of about 10hz, amplitude limit of 2mm (peak peak value), and large acceleration of 10g. The installation mode is vertical; Horizontal; Vertical and horizontal dual-purpose temperature range - 30 ℃～ 120 ℃ Relative humidity to 95% non condensing overall dimensions φ thirty-five × 78mm, weight approx. 350g, mounting thread m10 × 1.5 Ordering Guide Model Selection Code trlv-a □□- b □□ Model Selection Description Sensitivity a □□ 01 - 20mv/mm/s; 02——30mv/mm/s； 03 -- 50mv/mm/s measurement direction b □□ 01 -- vertical; 02 -- Horizontal; 03 - Vertical Horizontal dual-purpose sz-5/sz-6/sz-6b/trlv/tm0793v/tm079vd/9200/74712/47633 magnetoelectric low-frequency magnetoelectric speed displacement sensor eddy current shaft displacement sensor shaft vibration probe OD-051/OD-053/OD-054/OD-055/OD-081/OD-083/OD-061/OD-062/OD-151/OD-162/OD-165 eddy current shaft displacement sensor shaft vibration probe proximitor EC-001/EC-002/EC-003 eddy current shaft displacement sensor shaft vibration probe extension cable PR6422/PR6423/PR6424/PR6425/PR6426 eddy current shaft displacement Sensor shaft vibration probe CON011/91, technical parameter sensitivity 20 ～ 50mv/mm/s ± 1% (according to user adjustment) Frequency response (optional) 5 ～ 100hz, 10 ～ 500hz, 10 ～ 1000hz Guocontrol110/en900/en2000a1/vibration monitoring instrument zxp-f3200/zxp-




W1N8400-A01-B05, WIN8400 thermal expansion sensor1、被校准的速度传感器的输出导线与数字电压表连接。

2、频率选择在“80Hz”。

在校准传感器时，一般应将频率定在80Hz。

也可将频率置于其它频率位置校准传感器。

3、“功能选择”开关置于“速度”位置。  将“增益调节”电位器调至zui小；电源

开关置于“开”。

4、调节“输出电压”电位器，使校准仪振动速度输出幅值为10（mm/S）。此时，显示窗显示为：10.0mm/s。

5、数字电压表测量被测传感器的输出电压。

根据被测传感器的输出电压（实测值），即可计算出此传感器的误差。

                    

* 标准值是由被测传感器的灵敏度电压所决定的。

例如：

   传感器的灵敏度为200mV/cm/S，则它的输出电压(标准值)即为200mV。

   传感器的灵敏度为280mV/cm/S，则它的输出电压(标准值)即为280mV。

 当被校准的传感器为水平传感器时，校准仪应水平放置。

   当被校准的传感器为垂直传感器时，校准仪应垂直放置。

TD-2-50TD-2型热膨胀传感器

TD-2型热膨胀传感器主要用于测量汽轮机汽缸膨胀位移量，与热膨胀监控仪相配合即可完成热膨胀位移量的远传指示、报警、恒流输出等功能。就地指示视野大，远传指示为数字显示，清晰直观。采用中频差动变压器式位移传感器作为传感元件，是一种高可靠的 LVDT 位移传感器，抗力强，线性好，结构简单，不易损坏，能连续使用。 

振动速度传感器是利用磁电感应原理把振动信号转换成电信号。它主要由磁路系统、线圈组件、弹簧阻尼等部分组成。在传感器壳体中刚性地固定有两个线圈组件，磁钢用弹簧悬挂于壳体。当传感器在工作频率范围内工作时，线圈与磁钢产生相对运动，线圈切割磁力线，产生感应电动势（感应电压），该电压正比于机壳的振动速度。温度传感器的温度测量是利用铂电阻随温度线性变化的性质来测温的。


技术指标：
1. 量程： 0～50mm （量程由用户自定） 
2. 准确度：± 1% （满量程） 
3. 环境温度： -20 ℃ ～+100 ℃ 
4. 相对湿度：≤ 80% 

技术参数

1．振动传感器 
灵 敏 度：30mV/mm/s 
加 速 度：8g 
测量范围：2mm 
频率响应：10~300Hz 
2．温度传感器：PT100 
测量范围：0～400℃ 
3．环境温度：-10～100℃ 
4．测量方法：垂直、水平、轴向 
5．固定螺孔：在Φ85的圆周上均匀分布用4个M8螺钉固定 
6．外形尺寸：Φ70mm×180mm 
7．插入深度：83mm
PR9266/10 PR9268/11 PR9266/12 PR9268/20/30 PR9268/60/70 Electric vibration pad vibration sensor PR6418 relative displacement sensor PR9350 inductive displacement sensor PR9376 speed sensor PR9270 acceleration sensor TM0782A-K/TM078 vibration speed sensor cd-1/cd-2/cd-4/cd-4a/cd-6/cd-6a/cd-7-c/cd-7-s/cd-8/pad cover vibration sensor cd-21-2-c/cd-21-2-s/cd-21-t/s/bcd-21a/cd721/wind vibration speed sensor mls-9/mlv-6/mlv-7/mlv-8/mlv- 9200/mlv-9268/mlv-27/mt1/mt2t/mt3t/mt3m/vibration sensor cs-cd-001/cs-cd-SYTD2-A50, SYTD2-A80 expansion sensor tm0782a/tm0783a/ca yd/yd/kd/tm0782a/winh/mta/pr9270/shq-25x/200150/200155/200157/200350/200355/ca gt acceleration sensor lvdt displacement sensor 1000td2000td3000td4000td5000td6000tdczj-b2/cz-6/cjz-d/cjz-d2/mli-2001/wb-9902/wb-8112b/zj2/zj2-a/bearing pad vibration monitoring protector 8500/85100xy/85564/85200/85850bcd-21a/vibr

SYTD2-A50， SYTD2-A80 expansion sensor 010/od9200/od9300/s6000/pr9266/pr9268/20/30/60/70/bearing bush vibration sensor mlv-9200 (16699/900) /9200/74712/47633/ht-2zd-24/zd25/zdf bearing bush vibration speed sensor vb-z9500/vb-z9600/sj1061/sj1062 magnetoelectric vibration speed sensor 793V-K/TM079VD bearing vibration sensor PT079VD 3A/TM0j116/zxp-j200/zxp-j210/zxp - j220/dzx-400/pdm1201/wli-2004/wli-2003/wli-2001/s2662/vrs2000a11/wli-2011/pt2010/11 dual channel bearing vibration monitor zxp-j400/zxp-jjj 510/zxp-j520/xd-2/xzk-1/od-9008s/vibration measurement of double channel bushing cover

SYTD2-A50 and SYTD2-A80 expansion sensors have a frequency of about 10hz, amplitude limit of 2mm (peak peak value), and large acceleration of 10g. The installation mode is vertical; Horizontal; Vertical and horizontal dual-purpose temperature range - 30 ℃～ 120 ℃ Relative humidity to 95% non condensing overall dimensions φ thirty-five × 78mm, weight approx. 350g, mounting thread m10 × 1.5 Ordering Guide Model Selection Code trlv-a □□- b □□ Model Selection Description Sensitivity a □□ 01 - 20mv/mm/s; 02——30mv/mm/s； 03 -- 50mv/mm/s measurement direction b □□ 01 -- vertical; 02 -- Horizontal; 03 - Vertical Horizontal dual-purpose sz-5/sz-6/sz-6b/trlv/tm0793v/tm079vd/9200/74712/47633 magnetoelectric low-frequency magnetoelectric speed displacement sensor eddy current shaft displacement sensor shaft vibration probe OD-051/OD-053/OD-054/OD-055/OD-081/OD-083/OD-061/OD-062/OD-151/OD-162/OD-165 eddy current shaft displacement sensor shaft vibration probe proximitor EC-001/EC-002/EC-003 eddy current shaft displacement sensor shaft vibration probe extension cable PR6422/PR6423/PR6424/PR6425/PR6426 eddy current shaft displacement Sensor shaft vibration probe CON011/91, technical parameter sensitivity 20 ～ 50mv/mm/s ± 1% (according to user adjustment) Frequency response (optional) 5 ～ 100hz, 10 ～ 500hz, 10 ～ 1000hz Guocontrol110/en900/en2000a1/vibration monitoring instrument zxp-f3200/zxp-




W1N8400-A01-B05, WIN8400 This product is a sensor designed for measuring the expansion of steam turbine units in the steam turbine industry It has local and remote indications. The local indication has a large field of vision. It uses an intermediate frequency displacement sensor as the sensing element. The remote indication has good linearity, strong anti-interference, good reliability, and can be used continuously. The output is a standard current signal or voltage signal. It has a matching thermal expansion monitoring instrument.



▲ Technical indicators



1. Linear range: 0~25mm; 0~35mm； 0~50mm。 (Special specifications shall be in accordance with the contract)



2. Comprehensive accuracy: Level 1.0



3. Output: the sensor output is 4-20mA/0-10V/0-5V/1-5V.



4. Working temperature of sensor: - 10~100 ℃



5. Working mode: continuous



6. Excitation power supply: 1KHz, 5 ～ 12V rms (external power supply can be provided.





Installation Instructions



The sensor is installed on site, and its power box and indicator can be installed at the operation place or centralized control room. Others shall comply with the general requirements of electromechanical instruments. Note the following:



1. Before installation, the power supply must be connected. Check whether the local indication of the sensor is consistent with the scale of the thermal expansion monitoring protector, so as to check whether there is any deviation from the original factory adjustment value during transportation.



2. The sensor can be installed at any position, but it cannot be close to the strong magnetic field or strong current wire.







PR9266/10 PR9268/11 PR9266/12 PR9268/20/30 PR9268/60/70 Electric vibration pad vibration sensor PR6418 relative displacement sensor PR9350 inductive displacement sensor PR9376 speed sensor PR9270 acceleration sensor TM0782A-K/TM078 vibration speed sensor cd-1/cd-2/cd-4/cd-4a/cd-6/cd-6a/cd-7-c/cd-7-s/cd-8/pad cover vibration sensor cd-21-2-c/cd-21-2-s/cd-21-t/s/bcd-21a/cd721/wind vibration speed s ensor mls-9/mlv-6/mlv-7/mlv-8/mlv- 9200/mlv-9268/mlv-27/mt1/mt2t/mt3t/mt3m/vibration sensor cs-cd-001/cs-cd-SYTD2-A50, SYTD2-A80 expansion sensor tm0782a/tm0783a/ca yd/yd/kd/tm0782a/winh/mta/pr9270/shq-25x/200150/200155/200157/200350/200355/ca gt acceleration sensor lvdt displacement sensor 1000td2000td3000td4000td5000td6000tdczj-b2/cz-6/cjz-d/cjz-d2/mli-2001/wb-9902/wb-8112b/zj2/zj2-a/bearing pad vibration monitoring protector 8500/85100xy/85564/85200/85850bcd-21a/vibr



SYTD2-A50， SYTD2-A80 expansion sensor 010/od9200/od9300/s6000/pr9266/pr9268/20/30/60/70/bearing bush vibration sensor mlv-9200 (16699/900) /9200/74712/47633/ht-2zd-24/zd25/zdf bearing bush vibration speed sensor vb-z9500/vb-z9600/sj1061/sj1062 magnetoelectric vibration speed sensor 793V-K/TM079VD bearing vibration sensor PT079VD 3A/TM0j116/zxp-j200/zxp-j210/zxp - j220/dzx-400/pdm1201/wli-2004/wli-2003/wli-2001/s2662/vrs2000a11/wli-2011/pt2010/11 dual channel bearing vibration monitor zxp-j400/zxp-jjj 510/zxp-j520/xd-2/xzk-1/od-9008 s/vibration measurement of double channel bushing cover



SYTD2-A50 and SYTD2-A80 expansion sensors have a frequency of about 10hz, amplitude limit of 2mm (peak peak value), and large acceleration of 10g. The installation mode is vertical; Horizontal; Vertical and horizontal dual-purpose temperature range - 30 ℃