ETM832A-DNF-L-G2-500338
数据保护。对控件所做的所有联机更改
参数会自动存储，以便稍后上载到
工程数据库。这样，系统始终保持
在线更改的所有数据的完整记录。
冷重启。此功能可自动重新启动
电源故障时的控制器。重新启动完全
因为整个控制策略存储在
用于此目的的控制器NVM RAM。只需设置
将控制器的状态重新启动到当前状态。
具有满足您需求的灵活性
级操作。配备MQ控制器
处理DeltaV批处理选项，以及级
控制功能。
您还可以使用级控制功能，如神经和
MQ控制器上的模型预测控制。
数据传递。控制器具备以下能力
将智能HART®信息从现场设备传递到任何
控制网络中的工作站节点。这意味着你可以
利用应用程序，如资产管理
解决方案AMS设备管理器，使您能够远程
管理HART中包含的HART信息，或
配备FOUNDATION现场总线的设备。
为你的未来做好准备。随着系统的发展，您可以
扩展软件许可证以增加设备数量
分配给DeltaV控制器的信号标签（DST）。
从50开始，扩展到750 DST。控制策略
复杂性和控制模块扫描速率决定总体
控制器性能和应用程序大小。多余的
可以添加控制器以在线备份MQ控制器。
备用控制器自动联机
无颠簸过渡。有关更多信息，请参阅输入/输出
冗余产品数据表。
安装此即插即用系统结构提供
具有单个控制器的模块化系统增长
安装在Class 1、Div 2或ATEX Zone 2环境中。
请参阅系统电源和输入/输出子系统托架
其他信息的产品数据表。
旨在支持旧式迁移
级操作。MQ控制器提供DeltaV
用于迁移PROVOX和RS3控制器的平台，以及
支持PROVOX和RS3迁移I/O接口。
使用迁移，现有的PROVOX I/O保持不变
PROVOX的I/O接口，支持多达750个真实I/O
信号。串行数据集迁移到DeltaV串行卡
由于直接模块，不再需要所有虚拟输入/输出
DeltaV系统中可能的参考。
完全支持RS3系统迁移到DeltaV系统
使用MQ控制器和RS3的迁移I/O接口。
ETM832A-DNF-L-G2-500338

ETM832A-DNF-L-G2-500338
Data protection. All online changes made to control parameters are automatically stored for later upload into the engineering database. This way, the system always retains a complete record of all the data that has been changed online. Cold restart. This feature provides automatic restart of the controller in case of a power failure. The restart is completely autonomous because the entire control strategy is stored in NVM RAM of the controller for this purpose. Simply set the restart state of the controller to current conditions. Has the flexibility to meet your needs Advanced operations. The MQ Controller is equipped to handle the DeltaV Batch option, as well as advanced control functions. You can also use advanced control function such as Neural and Model Predictive Control on the MQ controller. Data pass-through. The controller is equipped with the ability to pass smart HART® information from field devices to any workstation node in the control network. This means you can take advantage of applications, such as Asset Management Solutions AMS Device Manager, that enable you to remotely manage the HART information contained in your HART or FOUNDATION fieldbus equipped devices. Prepares you for the future. As your system grows, you can expand your software license to increase the number of device signal tags (DSTs) allocated to the DeltaV controller. Begin with 50 and expand to 750 DSTs. Control strategy complexity and control module scan rates determine overall controller performance and application size. A redundant controller may be added to back up an MQ Controller online. The standby controller comes online automatically, with a bumpless transition. For more information, refer to the I/O Redundancy product data sheet. Mounting. This plug-and-play system structure provides modular system growth with a single controller and can be mounted in a Class 1, Div 2 or ATEX Zone 2 environment. Refer to the System Power Supplies and I/O Subsystem Carriers product data sheets for additional information. Designed to support legacy migration Advanced operations. The MQ controller provides the DeltaV platform to migrate PROVOX and RS3 controllers, and also supports the PROVOX and RS3 Migration I/O interfaces. The existing PROVOX I/O remains in place using the migration I/O interface to PROVOX with support of up to 750 real I/O signals. Serial datasets are migrated to DeltaV serial cards and all virtual I/O are no longer required due to the direct module references possible in the DeltaV system. RS3 system migrations to the DeltaV system are fully supported with MQ Controllers and the migration I/O interface for RS3.