TRICONEX  3805E  TRICONEX  3805E

When the unit starts normally, when the generator reaches the rated speed, the DCS will be put into AVR. When the generator voltage reaches the rated value, the DCS will be put into the synchronization device. The synchronization between the generator and the power grid is automatically realized by the synchronization device. During the synchronization process, the AVR and DEH are controlled by the DCS. When the synchronization conditions are met, the closing command is sent to the generator circuit breaker. After the synchronous closing is successful and the electrical load of the generator reaches the value, the DCS quickly switches the power consumption system of the compressor plant from the startup and standby transformers to the transformer transformer.
 

在机组启动时通过启／备变向厂用负荷供电；在机组正常用电时，由厂变供电并经低压厂变向400VMCC低压负荷供电以启动机组所必需的辅机；在厂用电消失时，为了保护设备和系统的，厂用电快切装置应快速将厂用工作负荷自动切换至启／备变；当确认保段母线失压后，应启动事故备用柴油机供电以保证设备。
ABB 2000 KVA 13,200-480 V PAD MOUNTED TRANSFORMER, NEW

ABB 1000/1120 KVA 13200 V PAD MOUNTED TRANSFORMER NEW

NIAGARA 2000 KVA 13,200-480 V PADMOUNTED TRANSFORMER

SQUARE D 2000 KVA 13200 - 480 V PAD MOUNTED TRANSFORMER

ALLEN BRADLEY 150 HP POWERFLEX DRIVE 2100 CENTERLIN

ALLEN BRADLEY 150 HP POWERFLEX DRIVE 2100 CENTERLINE

SQUARE D HVL LOAD CURRENT INTERRUPTER SWITCH, NEW

SQUARE D HVL LOAD CURRENT INTERRUPTER SWITCH, NEW

SQUARE D AT7000 TFRC ReatiVar POWER FACTOR CAPACITOR

ROBINSON EB124A 40½" INDUSTRIAL BLOWER, NEW

FALK 2080Y-L ENCLOSED GEAR DRIVE, NNB

FALK 2070Y3-B ENCLOSED GEAR DRIVE

FALK 2080Y3-L ENCLOSED GEAR DRIVE, REMAN

FALK 2070Y2-LD ENCLOSED GEAR DRIVE

FALK 2050YB3-L ENCLOSED GEAR DRIVE, NNB